Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Med Vet International Jorvet IV Latex Tubing 50 ft reel, 1/8" x 1/32 x 3/16, J0063D1A
High quality stretch tubing for a variety of clinical needs. Can be autoclaved. 50'L.
Accuflow Systems Saint-Gobain Silicone Tubing, Platinum-Cured, 3/8 in ID, 5/8 in OD
Saint-Gobain Sani-Tech STHT-C platinum-cured silicone tubing, 3/8 in ID x 5/8 in OD, is an ultra-pure, biopharmaceutical-grade tubing suitable for repeated autoclaving and sanitary fluid transfer.
- Platinum-cured silicone construction.
- Inner diameter 3/8 in (0.375 in / 9.53 mm).
- Outer diameter 5/8 in (0.625 in / 15.88 mm).
- Wall thickness 1/8 in (0.125 in / 3.18 mm).
- Hardness 50 Shore A.
- Burst pressure approximately 40.4 psi for this size.
- Withstands autoclaving; suitable for biopharmaceutical and laboratory fluid transfer.
- Color striping available for fluid-path identification.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PharMed BPT, 1/8"" ID x 1/4"" OD; 25 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
Ace Glass, Inc. FEP tubing, 1/2in OD x 3/8in ID, 10ft length
O.D x 3/8 I.D. FEP tubing made of high molecular weight resin for excellent stress crack resistance. Meets FDA requirements for repeated food contact. Chemically inert to most industrial chemicals and solvents. 10ft length.
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,50 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Braintree Scientific Polyethylene .034"""" x .060"""" Per Ft.,1000 ft. Continuous
Polyethylene Tubing Polyethylene is a relatively rigid polymer suitable for short-term catheterizations and for ex vivo applications. Polyethylene sleeves can be slipped over less rigid catheter materials (MicroRenathane, RenaSil™) at suture points to protect the latter from inadvertent constriction **Sold for research purposes only and not for human use**
Pacer Global LLC Saint-Gobain - 082 C-Flex TPE Tubing, 0.313'' ID, 0.5'' OD, 0.0935'' Wall, 50 Foot Coil, 1/EA - 082-313-3
Saint-Gobain - 082 C-Flex TPE Tubing, 0.313" ID, 0.5" OD, 0.0935" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - SaniTech-C Tubing, 0.5'' ID, 0.6875'' OD, 0.09375'' Wall, 100 Foot Coil, 1/EA - STHT-C-500-3H
Saint-Gobain - SaniTech-C Tubing, 0.5" ID, 0.6875" OD, 0.09375" Wall, 100 Foot Coil, 1/EA
Pacer Global LLC Saint Gobain 072 C-Flex TPE Tubing, Opaque, 0.25'' ID, 0.375'' OD, 0.0625'' Wall, 50 Foot Coil, 1/EA
Saint-Gobain - 072 C-Flex TPE Tubing, Opaque, 0.25" ID, 0.375" OD, 0.0625" Wall, 50 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - 374 C-Flex TPE Tubing, 0.75'' ID, 1.125'' OD, 0.1875'' Wall, 15 Foot Coil, 1/EA - 374-750-6
Saint-Gobain - 374 C-Flex TPE Tubing, 0.75" ID, 1.125" OD, 0.1875" Wall, 15 Foot Coil, 1/EA
Pacer Global LLC Saint-Gobain - 374 C-Flex TPE Tubing, 0.25'' ID, 0.438'' OD, 0.094'' Wall, 700 Foot Coil, 1/EA - 374-250-3S
Saint-Gobain - 374 C-Flex TPE Tubing, 0.25" ID, 0.438" OD, 0.094" Wall, 700 Foot Coil, 1/EA